Instrument Panel Assembly: Installation

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

CAUTION:

Be careful not to snag the harness.
Make sure to connect harness connector.
Take care not to scratch the instrument panel and related parts.

NOTE: When setting the instrument panel into position, push the three hooks into grommet (A) on the body panel.

Fig 1: Pushing Hooks Into Grommet Body Panel

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Refer to COMPONENT in General Description. < Ref. to INSTRUMENT PANEL , COMPONENT, General Description. >