Camshaft Position Sensor: Service and Repair
Camshaft Position SensorREMOVAL
1. Disconnect the ground cable from battery.
2. Disconnect the connector from camshaft position sensor.
3. Remove the bolt which installs camshaft position sensor to the support.
4. Remove the bolt which installs the camshaft position sensor support to camshaft cap LH.
5. Remove the camshaft position sensor and the support as a unit.
6. Remove the camshaft position sensor itself.
INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Camshaft position sensor support: 6.4 N.m (0.65 kgf-m, 4.7 ft-lb)
Camshaft position sensor: 6.4 N.m (0.65 kgf-m, 4.7 ft-lb)