LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback XT, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4DOTC) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (OBD Mode)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SUBARU Select Monitor (OBD Mode)

  1. On the «Main Menu» display screen, select {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display screen, select the {OBD System} and press the [YES] key.
  5. On the «OBD Menu» display screen, select {DTC Clear} and press the [YES] key.
  6. When the "Clear Diagnostic Code?" is shown on the screen, press the [YES] key.
  7. Turn the ignition switch to OFF and then turn the Subaru Select Monitor switch to OFF.
NOTE:
  • Initial diagnosis of electronic throttle control is performed after memory clearance. Therefore, start the engine after 10 seconds or more have passed since turning the ignition switch to ON.
  • For detailed operation procedure, refer to the "Subaru Select Monitor Operation Manual".
scientia non olet · About LEMON Manuals