LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback XT, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clear Memory Mode

  1. On the «Main Menu» display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Brake Control} and press the [YES] key.
  3. Press the [YES] key after {VDC AWD AT} is displayed.
  4. On the «Brake Control Diagnosis» display screen, select the {Clear Memory} and press the [YES] key.
    DIAGNOSIS PROCEDURE

    Display Contents to be monitored
    Clear memory? DTC deleting function
  5. When "Done" and "Turn ignition switch OFF" are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
    NOTE: For details concerning operation procedures, refer to the "Subaru Select Monitor Operation Manual".
scientia non olet · About LEMON Manuals