LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback XT, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) (Diagnostics) >> Subaru Select Monitor >> Operation >> Read Current Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Read Current Data

  1. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Brake Control} and press the [YES] key.
  3. Press the [YES] key after {VDC AWD AT} is displayed.
  4. On the «Brake Control Diagnosis» display screen, select the {Current Data Display/Save}, and then press the [YES] key.
  5. On the «Display Menu» screen, select the data display method and press the [YES] key.
  6. Using a scroll key, scroll the display screen up or down until necessary data is shown.
    • A list of the support data is shown in the following table.
    SUPPORT DATA CHART

    Display Contents to be monitored Unit of measure
    FR Wheel Speed Wheel speed detected by front ABS wheel speed sensor RH is displayed. km/h or MPH
    FL Wheel Speed Wheel speed detected by front ABS wheel speed sensor LH is displayed. km/h or MPH
    RR Wheel Speed Wheel speed detected by rear ABS wheel speed sensor RH is displayed. km/h or MPH
    RL Wheel Speed Wheel speed detected by rear ABS wheel speed sensor LH is displayed. km/h or MPH
    Steering Angle Sensor Steering angle detected by steering angle sensor is displayed. deg
    Yaw Rate Sensor Vehicle angular speed detected by yaw rate sensor is displayed. deg/s
    Pressure Sensor Brake fluid pressure detected by pressure sensor is displayed. bar
    Lateral G Sensor Vehicle lateral acceleration detected by lateral G sensor is displayed. m/s (m/s/2)
    IG power supply voltage Voltage supplied to VDCCM&H/U is displayed. V
    EMA signal Engine control command signal is displayed. 1 or 0
    TCS Operation Light TCS operation condition is displayed. ON or OFF
    VDC Operation Light VDC operation condition is displayed. ON or OFF
    VDC OFF Light ON/OFF condition of VDC OFF indicator light is displayed. ON or OFF
    EBD Warning Light ON operation of the EBD warning light is displayed. ON or OFF
    ABS Warning Light ON operation of the ABS warning light is displayed. ON or OFF
    VDC Warning Light ON operation of the VDC warning light is displayed. ON or OFF
    VDC OK B Signal Malfunction of VDC sensor (except for vehicle speed sensor) is displayed. 1 or 0
    Valve Relay Signal Valve relay operation signal is displayed. ON or OFF
    Motor Relay Signal Motor relay operation signal is displayed. ON or OFF
    Motor Relay Monitor Motor relay monitor signal is displayed. ON or OFF
    PATA Signal Operation condition of VDC OFF switch is displayed. ON or OFF
    BLS Signal Brake ON/OFF is displayed. ON or OFF
    Gear position Present gear position is displayed. -
    Engine Speed Present engine speed is displayed. RPM
    Acceleration opening angle signal Acceleration opening is displayed. %
    NOTE: For details concerning operation procedures, refer to the "Subaru Select Monitor Operation Manual".
scientia non olet · About LEMON Manuals