LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback XT, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Security And Locks) >> Impact Sensor >> Operation >> Setting With/Without Impact Sensor Using SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Setting With/Without Impact Sensor Using SUBARU Select Monitor

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the SUBARU Select Monitor to the data link connector.
  2. Turn the ignition switch ON.
  3. Select {KEYLESS UNIT} from the main menu.
  4. {Select {CUSTOMIZE UNIT}.
  5. Perform the setting with/without impact sensor.
    • Installation: ON
    • Removal: OFF
  6. Perform the impact sensor ON/OFF setting.
    • Installation: ON
    • Removal: OFF
  7. Turn the ignition switch OFF, and then remove the SUBARU Select Monitor.
scientia non olet · About LEMON Manuals