Interrupt Relay: Inspection
WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
Measure the interrupt relay resistance between terminals (indicated in the table below) when connecting terminal No. 4 to battery positive terminal and terminal No. 2 to battery ground terminal.
TERMINAL REFERENCE
| Current | Terminal No. | Standard |
|---|---|---|
| Flow | 1 - 3 | More than 1 MΩ |
| 1 - 5 | Less than 1 Ω | |
| No flow | 1 - 3 | Less than 1 Ω |
| 1 - 5 | More than 1 MΩ |
If the measured value is out of specifications indicated in table, replace security horn relay.