Alarm History Information Mode
WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch ON.
- The indicator light blinks.INDICATOR LIGHT BLINKS REFERENCE
The frequency of indicator light blinks Vehicle state Once A light warning is activated by the impact sensor (Option). This may indicate that your vehicle has been lightly struck by an outside force or tampered with by an unauthorized person. Twice A strong warning is activated by the impact sensor (Option). This may indicate that your vehicle has been strongly struck by an outside force or tampered with by an unauthorized person. 3 times The ignition switch has been turned ON. 5 times Any door has been opened.
NOTE:
- If the ALARM/WARNING occurred in ARM mode, the indicator light blinks at the time when the ignition switched OFF → ON in the next DISARM.
- If the ALARM/WARNING did not occur, the indicator light does not blink.
- When multiple alarms were detected at the same time, a lot of blinking frequencies are given priority and blinked.
- All indicator lights blink when the ignition switch is turned ON in DISARM mode, and then the history is updated at the next ARM mode.