Electrical Specification
WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
ELECTRICAL SPECIFICATION REFERENCE
| Content | Terminal No. | Measuring condition |
|---|---|---|
| Turn signal light (Left) | 1 (OUTPUT) | Battery voltage is present when the alarm is activated. |
| Power supply (Back-up) | 2 | Battery voltage is constantly present. |
| Door switch | 6 (INPUT) | 0 V is present when any door is opened. |
| Impact sensor | 8 | 0 V and battery voltage are alternately repeated each 45 msec, when the impact sensor is not affected by vibration. |
| Ignition switch (ON) | 10 (INPUT) | Battery voltage is present when ignition switch is turned to ON. |
| Security horn relay | 11 (OUTPUT) | 0 V is present when the alarm is activated. |
| Interrupt relay | 12 (OUTPUT) | Battery voltage is present when the alarm is activated. |
| Turn signal light (Right) | 13 (OUTPUT) | Battery voltage is present when the alarm is activated. |
| Ground | 14 | 0 V is constantly present. |
| Security indicator light | 15 (OUTPUT) | 0 V is present when the alarm is activated. |
| Power supply (Back-up) | 26 | Battery voltage is constantly present. |