Extension Case: Assembly

WARNING: This page is about a different variant/trim than selected.

Press-fit the new oil seal using ST and the press.
ST 498057300 INSTALLER
Press-fit the dust cover.
Install the transfer clutch pipe to the extension case while being careful not to deform the pipe.

Fig 1: Identifying Transfer Clutch Pipe
Courtesy of SUBARU OF AMERICA, INC.
Install the transfer clutch assembly to the case.
NOTE:
- Be careful not to damage the seal ring.
- Press-fit the clutch assembly to the bottom of the bearing shoulder completely.
  
  Fig 2: Identifying Transfer Clutch Assembly
  Courtesy of SUBARU OF AMERICA, INC.