DTC Display Mode
When the DTC display mode operates, {ECM}, {TCM}, {ABSCM/VDCCM} is displayed cyclically in this order for every press of the trip knob. DTC is displayed in the following table according to type of control module, receiving DTC, DTC detected, No DTC. If CAN communication has some trouble, "-" is displayed.
DTC DISPLAY MODE CHART
| Control module | Condition | Display |
|---|---|---|
| ECM | Receiving DTC | Trip "A" + "P (Blink)" |
| DTC detected | Trip "A" + "P xxxx" | |
| No DTC | Trip "A" + "P -" | |
| TCM | Receiving DTC | Trip "B" + "P (Blink)" |
| DTC detected | Trip "B" + "P xxxx" | |
| No DTC | Trip "B" + "P -" | |
| ABSCM/VDCCM | Receiving DTC | Trip "A" + "C (Blink)" |
| DTC detected | Trip "A" + "C xxxx" | |
| No DTC | Trip "A" + "C -" | |
| When CAN communication error is occurred | - | "-" |