LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback i, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Drive Cycle >> Procedure >> Drive Cycle E
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Cycle E

  1. Make sure that the battery voltage is more than 10.9 V.
  2. Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . >
  3. Drive the vehicle for the distance equal to the fuel of 30 (7.9 US gal, 6.6 Imp gal).
    NOTE:
    • It is acceptable to drive the vehicle intermittently.
    • Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
DTC CHART

DTC Item Condition
P0461 Fuel Level Sensor "A" Circuit Range/Performance -