Remote Control Mirror Switch: Inspection
WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
Move remote control mirror switch to each position and check continuity between terminals.
Change over switch left position:
REMOTE CONTROL MIRROR SWITCH CHANGE OVER SWITCH LEFT POSITION REFERENCE
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | More than 1 MΩ |
| UP | 7 and 4, 2 and 1 | Less than 1 Ω |
| DOWN | 7 and 2, 4 and 1 | Less than 1 Ω |
| LEFT | 9 and 4, 2 and 1 | Less than 1 Ω |
| RIGHT | 9 and 2, 4 and 1 | Less than 1 Ω |
Change over switch right position:
REMOTE CONTROL MIRROR SWITCH CHANGE OVER SWITCH RIGHT POSITION REFERENCE
| Switch position | Terminal No. | Standard |
|---|---|---|
| OFF | - | More than 1 MΩ |
| UP | 6 and 4, 2 and 1 | Less than 1 Ω |
| DOWN | 6 and 2, 4 and 1 | Less than 1 Ω |
| LEFT | 8 and 4, 2 and 1 | Less than 1 Ω |
| RIGHT | 8 and 2, 4 and 1 | Less than 1 Ω |
If defective, replace the switch.