LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H6DO) >> System Operation Check Mode >> Operation >> Idle Speed Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Speed Control

  1. On the «System Operation Check Mode» display screen, select {Idle Engine Speed Control}.
  2. On the «Start the Engine» display screen, start the engine and select the [OK].
  3. In the «Idle Engine Speed Control» screen, select the [A] or the [V] to change the setting values. Setting is possible in a range between 500 rpm - 2000 rpm, in increments of 50 rpm. However, the engine speed that can actually be controlled will vary depending on the vehicle.
  4. Select the [NO] to end the idle engine speed control. The screen will return to the «System Operation Check Mode» screen.
scientia non olet · About LEMON Manuals