EGR Valve Control
CAUTION:
After carrying out the Operation Check Mode, perform the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode. > and Inspection Mode <Ref. to
PROCEDURE , Inspection Mode. >.
- On the «System Operation Check Mode» display screen, select the {EGR Valve Control}.
- On the «Start the Engine» display screen, start the engine and select the [OK].
- On the "EGR Valve Control" display screen, select [up triangle] or [down triangle to change the setting value, and select the [OK].
It is possible to set by 1 STEP. However, the actual STEP amount that can be controlled is varied by vehicle type.
- Selecting the [NO] completes the EGR Valve Control. The display will then return to the «System Operation Check Mode» screen.NOTE: For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL ".