Fuel Pump Control (On/Off Operation)
CAUTION:
After carrying out the Operation Check Mode, perform the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode.> and Inspection Mode <Ref. to
PROCEDURE , Inspection Mode.>.
- On the «System Operation Check Mode» display screen, select the {Fuel Pump Control}.
- On the «Fuel Pump Control» display screen, select the {ON/OFF Operation}.
- On the «Turn Ignition Switch ON with Engine Stalled» display screen, select the [OK].
- Selecting the [NO] completes the ON/OFF Operation. The display will then return to the «Fuel Pump Control» screen.