Idle Speed Control
CAUTION:
After carrying out the Operation Check Mode, perform the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode.> and Inspection Mode <Ref. to
PROCEDURE , Inspection Mode.>.
- On the «System Operation Check Mode» display screen, select the {Idle Speed Control}.
- On the «Start the Engine» display screen, start the engine and select the [OK].
- On the «idle Speed Control» display screen, select [
] or [
] to change the setting value.
It is possible to set by 50 rpm, ranging from 500 rpm to 2,000 rpm. However, the actual idle speed that can be controlled is varied by vehicle type.
- Select the [NO] completes the Idling Speed Control. The display will then return to the «System Operation Check Mode» screen.