Injector Control (Injection Stop Mode)
CAUTION:
After carrying out the Operation Check Mode, perform the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode.> and Inspection Mode <Ref. to
PROCEDURE , Inspection Mode.>.
- On the «System Operation Check Mode» display screen, select the {Injector Control}.
- On the «Injector Control» display screen, select the {Injection Stop Mode}.
- Select the desired injector number on the «Injection Stop Mode».
- On the «Start the Engine» display screen, start the engine and select the [OK].
- Select the [NO] completes the Injection Stop Mode. The display will then return to the «Injector Control» screen.