Immobilizer Control Module: Removal
NOTE:
- Prepare the security ID plate.
- Prepare all registered immobilizer keys for the model with immobilizer.
- When replacing the immobilizer control module, register the immobilizer. At that time, a new immobilizer key is required. Refer to the REGISTRATION MANUAL FOR IMMOBILIZER
- If not replacing the immobilizer control module, re-registration of a key used before is not required.
- If not replacing the immobilizer control module, a maximum of four keys, including the added key, can be registered.
- Disconnect the ground cable from the battery.
- Remove the instrument panel lower cover. <Ref. to REMOVAL Instrument Panel Assembly. >
- Disconnect the connector from immobilizer control module.
- Remove the immobilizer control module.