Select Lever: Assembly
- Clean all the parts before assembly.
- Apply grease to each part of select lever. <Ref. to
AT SELECT LEVER , COMPONENT, General Description .>
Lock plate:
SUNCALL GREASE (Part No. 002948040)
Except for lock plate:
KOPR-KOTE (Part No. 003603001) or equivalent
- Assemble in the reverse order of disassembly.
- After completing installation, shift the select lever from "P" range to "1" range, then check whether the select indicator and select lever matches, whether the pointer and position mark matches, and check the operating force.