Fuel Tank: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.

CAUTION: Be careful not to spill fuel.

Set the vehicle on a lift.
Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, FUEL .>
Drain fuel from fuel tank. <Ref. to DRAINING FUEL , PROCEDURE, FUEL .>
Remove the rear seat.
Disconnect the connector (A) of fuel tank cord to the rear harness.
Push the grommet (B) which holds the fuel tank cord on the floor panel into under the body.

Fig 1: Identifying Connector And Grommet
Courtesy of SUBARU OF AMERICA, INC.
Remove the rear crossmember. <Ref. toREMOVAL REMOVAL , Rear Crossmember .>
Remove the canister. <Ref. to REMOVAL , Canister .>
Disconnect the connector from the pressure control solenoid valve.
Loosen the clamp, and disconnect the fuel filler hose (A) and evaporation hose (B) from fuel filler pipe.

Fig 2: Identifying Fuel Filler And Evaporation Hose
Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Identifying Evaporation Hose
Courtesy of SUBARU OF AMERICA, INC.
Move the clip, and disconnect the quick connector. <Ref. to REMOVAL , Fuel Delivery And Evaporation Lines .>
Disconnect the fuel hoses.

Fig 4: Identifying Fuel Hoses
Courtesy of SUBARU OF AMERICA, INC.
Support the fuel tank with transmission jack, remove the bolts from bands and dismount the fuel tank from the vehicle.

WARNING:

A helper is required to perform this work.
Fuel may remain in the side which does not have drain plug of fuel tank. This will cause the left and right sides to be unbalanced. Be careful not to drop the fuel tank when removing.

Fig 5: Locating Band Bolts

Courtesy of SUBARU OF AMERICA, INC.