LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Impreza WRX STi >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Fuel Injection (Fuel Systems) (H4SO)) >> Engine Control Module (ECM) >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Control Module (ECM): Removal

WARNING: This page is about a different car, the 2006 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the lower inner trim of passenger side. < Ref. to REMOVAL , Lower Inner Trim. >
  3. Detach the floor mat of front passenger seat.
  4. Remove the protect cover.
    Fig 1: Locating Protect Cover Bolts
    G04997430
  5. Remove the nuts (A) which hold ECM to the bracket.
  6. Remove the clip (B) from the bracket.
    Fig 2: Identifying ECM Bracket Nuts And Clip
    G04997431
  7. Disconnect the ECM connectors and take out the ECM.