LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Forester X, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (OBD Mode)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SUBARU Select Monitor (OBD Mode)

  1. On the « Main Menu » display screen, select the {Each System Check}.
  2. On the « System Selection Menu » display screen, select the {Engine Control System}.
  3. Click the [OK] button after the information of engine type has been displayed.
  4. On the « Engine Diagnosis » display screen, select the {OBD System}.
  5. On the « OBD Menu » display screen, select the {Clear Diagnostic Code?}.
  6. When the « Clear Diagnostic Code? » is shown on the screen, click the [Yes] button.
  7. When « Done » and « Turn ignition switch to OFF » is shown on the display screen, turn the ignition switch to OFF.
    NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
scientia non olet · About LEMON Manuals