EGR Valve Control
CAUTION:
After executing the operation check mode, perform the Clear Memory Mode < Ref. to
OPERATION , Clear Memory Mode>.
- On the « System operation check mode » display, select the {EGR Valve Control}.
- On the « Start the Engine » display screen, start the engine and click the [OK] button.
- In the « EGR Valve Control » screen, click the ↑ button or the ↑ button to change the setting values, then click the [OK] button.
It is possible to set by 1 STEP. However, the actual STEP amount that can be controlled is varied by vehicle type.
- Click the "Cancel" button to end the EGR valve control. The display will then return to the « System Operation Check Mode » screen.NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".