Idle Speed Control
CAUTION:
After executing the operation check mode, perform the Clear Memory Mode < Ref. to
OPERATION , Clear Memory Mode>.
- On the « System operation check mode » display screen, select the {Idle Speed Control}.
- On the « Start the Engine » display screen, start the engine and click the [OK] button.
- In the « Idle Engine Speed Control » screen, click the ↑ button or the ↓ button to change the setting values, then click the [OK] button.
Setting is possible in a range between 500 rpm - 2,000 rpm, in increments of 50 rpm. However, the engine speed that can actually be controlled will vary depending on the vehicle.
- Click the [Cancel] button to end the idle speed control. The screen will return to the « System Operation Check Mode » screen.NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".