LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs - Vehicle Dynamics Control (VDC) System >> ABS Sequence Control >> Operation >> Abs Sequence Control With SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Abs Sequence Control With SUBARU Select Monitor

  1. Connect the Subaru Select Monitor to the Subaru data link connector under the driver's side instrument panel lower cover.
  2. Turn the ignition switch ON.
  3. Run the Subaru Select Monitor.
  4. Set the Subaru Select Monitor to the "BRAKE CONTROL" mode.
  5. When the "Function check sequence" is selected, the "ABS sequence control" will start.
  6. Execute the following operations when the message "Press Brake Pedal with braking force of 100 to 150 kgf is displayed.
    1. When using a brake tester, press the brake pedal with a force of 1,000 N (102 kgf, 225 lb).
    2. When using the pressure gauge, press the brake pedal so as to make the pressure gauge indicate 3,500 kPa (36 kg/cm2 , 507 psi).
  7. "OK" will be displayed. Select the "OK".
  8. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About LEMON Manuals