Idle Speed Control
CAUTION:
After carrying out the Operation Check Mode, perform the Clear Memory Mode < Ref. to
OPERATION , Clear Memory Mode> and Inspection Mode < Ref. to
PROCEDURE , Inspection Mode >.
- On the « System operation check mode » display screen, select the {Idle Speed Control}.
- On the « Start the Engine » display screen, start the engine and click the [OK] button.
- In the « Idle Engine Speed Control » screen, click the [↑] button or the [↓] button to change the setting values, then click the [OK] button.
It is possible to set by 50 rpm, ranging from 500 rpm to 2,000 rpm. However, the actual idle speed that can be controlled is varied by vehicle type.
- Click the [Cancel] button to end the idle speed control. The screen will return to the « System Operation Check Mode » screen.NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".