Idling Ignition Timing Fixed
CAUTION:
After carrying out the Operation Check Mode, perform the Clear Memory Mode < Ref. to
OPERATION , Clear Memory Mode> and Inspection Mode < Ref. to
PROCEDURE , Inspection Mode >.
- On the « System operation check mode » display screen, select the {Idling Ignition Timing Fixed}.
- On the « Start the Engine » display screen, start the engine and click the [OK] button.
- Click the [Cancel] button to end the idle ignition timing fixed. The screen will return to the « System Operation Check Mode » screen.NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".