Section 11 (Clutch System): General Description: Specification
WARNING: This page is about a different variant/trim than selected.
CLUTCH SYSTEM GENERAL SPECIFICATION
| Model | Non-turbo | Turbo | |||
| Clutch cover | Type | Push type | |||
| Diaphragm set load | kgf (lbf) | 580 (1276) | 800 (1760) | ||
| Clutch disc | Facing material | Woven (Non asbestos) | |||
| O.D. x I.D. x thickness mm (in) | Flywheel side | 225 x 150 x 3.5 (8.86 x 5.9 x 0.138) | 230 x 155 x 3.2 (9.06 x 6.10 x 0.126) | ||
| Pressure plate side | 230 x 155 x 3.5 (9.06 x 6.10 x 0.138) | ||||
| Spline outer diameter | mm (in) | 25.2 (0.992), (Number of teeth: 24) | |||
| Clutch release lever ratio | 1.6 | 1.6 | |||
| Release bearing | Grease-packed self-aligning | ||||
| Clutch pedal | Full stroke | mm (in) | 130 - 135(5.12 - 5.32) | ||
| Free play | mm (in) | 4.35 - 11.1 (0.17 - 0.44) | |||
| Clutch disc | Depth of rivet head | mm (in) | Standard | Flywheel side: 1.35 - 1.95 (0.053 - 0.077) Clutch cover side: 1.65 - 2.25 (0.065 - 0.089) | |
| Limit of sinking | 0.3 (0.012) | ||||
| Limit of runout | mm (in) | 0.7 (0.028) at R = 107.5 (4.23) | 0.7 (0.028) at R = 110.0 (4.33) | ||