LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Lighting System) >> Combination Base Switch Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Base Switch Assembly: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's airbag module. <Ref. to REMOVAL , Driver's Airbag Module .>
  2. Remove the steering wheel. <Ref. to REMOVAL , Steering Wheel .>
  3. Remove the screws and remove the steering column lower cover.
    Fig 1: Locating Steering Column Lower Cover Screws
    G05022834Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the combination switch. <Ref. to REMOVAL , Combination Switch (Light) .> <Ref. to REMOVAL , REMOVAL, Combination Switch (Wiper) .>
  5. Remove the four screws and remove the roll connector.
  6. Remove the three screws.
    Fig 2: Locating Combination Switch Screws
    G05004089Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector and remove the combination base switch assembly.
scientia non olet · About LEMON Manuals