Symptom Chart
WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART
| Symptom | Repair order | Reference |
|---|---|---|
| None of the functions of the keyless entry system operate. | 1. Check the transmitter battery. | < Ref. to CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION , INSPECTION, Keyless Entry System. > |
| 2. Check the fuse. | < Ref. to CHECK FUSE , INSPECTION, Keyless Entry System. > | |
| 3. Check the keyless entry control module. | < Ref. to CHECK KEYLESS ENTRY CONTROL MODULE , INSPECTION, Keyless Entry System. > | |
| 4. Check the power supply and ground circuit for body integrated unit. | < Ref. to CHECK BODY INTEGRATED UNIT POWER SUPPLY AND GROUND CIRCUIT , INSPECTION, Keyless Entry System. > | |
| 5. Check the key warning switch. | < Ref. to CHECK KEY WARNING SWITCH , INSPECTION, Keyless Entry System. > | |
| 6. Check the door switch. | < Ref. to CHECK DOOR SWITCH , INSPECTION, Keyless Entry System. > | |
| 7. Check the body integrated unit. | < Ref. to BASIC DIAGNOSTIC PROCEDURE . > | |
| The keyless transmitter cannot be registered. | 1. Check the key warning switch. | < Ref. to CHECK KEY WARNING SWITCH , INSPECTION, Keyless Entry System. > |
| 2. Check the door lock switch signal. | < Ref. to CHECK DOOR LOCK SWITCH. , INSPECTION, Keyless Entry System. > | |
| 3. Check the ignition switch. | < Ref. to CHECK IGNITION SWITCH. , INSPECTION, Keyless Entry System. > | |
| 4. Check the door switch. | < Ref. to CHECK DOOR SWITCH , INSPECTION, Keyless Entry System. > | |
| 5. Check the body integrated unit. | < Ref. to BASIC DIAGNOSTIC PROCEDURE . > | |
| Door lock or unlock does not operate. NOTE: If the door lock control system does not operate when using the door lock switch, check the door lock control system. < Ref. to INSPECTION , Door Lock Control System. > | 1. Check the transmitter battery. | < Ref. to CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION , INSPECTION, Keyless Entry System. > |
| 2. Check the keyless entry control module. | < Ref. to CHECK KEYLESS ENTRY CONTROL MODULE , INSPECTION, Keyless Entry System. > | |
| 3. Check the key warning switch. | < Ref. to CHECK KEY WARNING SWITCH , INSPECTION, Keyless Entry System. > | |
| 4. Check the door switch. | < Ref. to CHECK DOOR SWITCH , INSPECTION, Keyless Entry System. > | |
| 5. Check the body integrated unit. | < Ref. to BASIC DIAGNOSTIC PROCEDURE . > | |
| The panic alarm does not operate. | 1. Check the keyless transmitter battery and function. | < Ref. to CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION , INSPECTION, Keyless Entry System. > |
| 2. Check the horn operation. | < Ref. to CHECK HORN OPERATION. , INSPECTION, Keyless Entry System. > | |
| 3. Check the body integrated unit. | < Ref. to BASIC DIAGNOSTIC PROCEDURE . > | |
| Trunk lid unlock does not operate. (Sedan model) | 1. Check the transmitter battery. | < Ref. to CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION , INSPECTION, Keyless Entry System. > |
| 2. Check the keyless entry control module. | < Ref. to CHECK KEYLESS ENTRY CONTROL MODULE , INSPECTION, Keyless Entry System. > | |
| 3. Check the key warning switch. | < Ref. to CHECK KEY WARNING SWITCH , INSPECTION, Keyless Entry System. > | |
| 4. Check the trunk lid lock actuator. | < Ref. to CHECK TRUNK LID LOCK ACTUATOR , INSPECTION, Keyless Entry System. > | |
| 5. Check the body integrated unit. | < Ref. to BASIC DIAGNOSTIC PROCEDURE . > | |
| Buzzer and hazard light do not operate. | 1. Check the buzzer operation. | < Ref. to CHECK KEYLESS BUZZER , INSPECTION, Keyless Entry System. > |
| 2. Check the hazard light operation. | < Ref. to CHECK HAZARD LIGHT OPERATION , INSPECTION, Keyless Entry System. > | |
| 3. Check the body integrated unit. | < Ref. to BASIC DIAGNOSTIC PROCEDURE . > | |
| Room light does not operate. | 1. Check the room light operation. | < Ref. to CHECK ROOM LIGHT OPERATION , INSPECTION, Keyless Entry System. > |
| 2. Check the body integrated unit. | < Ref. to BASIC DIAGNOSTIC PROCEDURE . > | |
| Ignition switch illumination does not operate. | 1. Check the ignition switch illumination. | < Ref. to CHECK IGNITION SWITCH ILLUMINATION , INSPECTION, Keyless Entry System. > |
| 2. Check the body integrated unit. | < Ref. to BASIC DIAGNOSTIC PROCEDURE . > |