Combination Switch (Light): Removal

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from the battery.
Remove the screws and remove the steering column covers (upper and lower).

Fig 1: Locating Steering Column Covers Screw
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from the combination switch.
Remove the three screws, and pull out the combination base switch assembly toward you.

Fig 2: Locating Combination Base Switch Assembly Screws
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws which secure the switch, then remove the combination switch.

Fig 3: Locating Combination Switch Screws

Courtesy of SUBARU OF AMERICA, INC.