Front Fog Light Assembly: Removal

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from the battery.
Disengage the two clips, and then turn over the mud guard.

Fig 1: Locating Mud Guard Clips
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the harness connector.
Remove the upper clip and the lower bolts, and then remove the fog light assembly.

Fig 2: Locating Fog Light Assembly Clip And Bolts

Courtesy of SUBARU OF AMERICA, INC.