Wagon Model
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the ground cable from battery.
- Remove the clip.
- While pressing the section (A), insert your finger or a flat-tip screwdriver wrapped with tape into the clearance (B) to remove claws in the order of (C), (D), (E), and remove the rear combination cover.
- Remove the two bolts, and then detach the rear combination light by pulling it to the rear side of vehicle.
- After turning the sockets of the tail/stop light bulbs and rear turn signal light bulbs, remove the rear combination light.