Read Current Data: Operation

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

On the «Main Menu» display screen, select {Each System Check}.
On the «System Selection Menu» display screen, select the {Integ. unit mode}.
On the «Integ. unit mode failure diag» display screen, select the {Current Data Display & Save}.
On the «Data Display Menu» screen, select the {12 Data Display}.
Using the scroll key, scroll the display screen up or down until the desired data is shown.
<Ref. to DISPLAY OF ANALOG DATA .> <Ref. to DISPLAY OF ON/OFF DATA .> <Ref. to CONFIRMATION OF CURRENT SETTING .>