Function Check

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.

On the «Main Menu» display screen, select {Each System Check}.
On the «System Selection Menu» display screen, select the {Integ. unit mode}.
On the «Integ. Unit mode failure diag» display screen, select {Function Check}.
Select the item to be operated on the «Function Check» display screen with «UP/Down key» and select the [OK].

Fig 1: Subaru Select Monitor Display - Function Check
Courtesy of SUBARU OF AMERICA, INC.
Selecting the [OK] starts, [NO] cancels the operation and [OK] returns to the System Operation Check Mode display screen.
NOTE: If not equipped (based on area or condition), process will not go on.