LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (LAN System (Diagnostics)) >> Subaru Select Monitor >> Operation >> Read Current Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Read Current Data

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» display screen, select {Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Integ. unit mode}.
  3. On the «Integ. unit mode failure diag» display screen, select the {Current Data Display & Save}.
  4. On the «Current Data Display & Save» display screen, select the {12 Data Display}.
  5. Using the scroll key, scroll the display screen up or down until the desired data is shown.

    A support list contains both of analog and digital data, and they are shown in the following table.

scientia non olet · About LEMON Manuals