Front Axle: Inspection

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Moving the front tire up and down by hand, check there is no backlash in bearing, and check the wheel rotates smoothly.

Fig 1: Checking Wheel Rotation
Courtesy of SUBARU OF AMERICA, INC.
Inspect the lean of axis direction using a dial gauge. Replace the bearing if the load range exceeds the limitation.
Service limit:

Maximum: 0.05 mm (0.0020 in)

Fig 2: Inspecting Lean Of Axis Direction Using Dial Gauge
Courtesy of SUBARU OF AMERICA, INC.