LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Fuel Injection System (H6DO)) >> Fuel Pump Control Unit >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Control Unit: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the rear quarter trim of the left side. (Wagon model) < Ref. to REMOVAL , Rear Quarter Trim. >
  3. Peel the trunk side trim of the left side. (Sedan model)
  4. Remove the fuel pump control unit.
    • Wagon model
      Fig 2: Identifying Fuel Pump Control Unit (Wagon Model)
      G05665356Courtesy of SUBARU OF AMERICA, INC.
    • Sedan model
      Fig 3: Identifying Fuel Pump Control Unit (Sedan Model)
      G05665357Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from fuel pump control unit.