LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (A/T Control Systems) >> Reverse Check Cable >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reverse Check Cable: Inspection

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure the slider works smoothly. If it does not move, adjust the reverse check cable, or check the slider for damage. <Ref. to ADJUSTMENT  , Reverse Check Cable .>
  2. Check that the gear is shifted to the reverse when the slider is lifted. If the gear is not shifted to the reverse, adjust the reverse check cable. <Ref. to ADJUSTMENT  , Reverse Check Cable .>
  3. Check that the gear is not shifted to the reverse when the slider is not lifted. If the gear is shifted to the reverse, adjust or replace the reverse check cable. <Ref. to ADJUSTMENT  , Reverse Check Cable .>
scientia non olet · About LEMON Manuals