Rear Differential
WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
When replacing a rear differential assembly, select the correct one according to the following table.
NOTE:
- Using a different rear differential assembly will cause the drive train and tires to drag or emit abnormal noise.
- For option code, refer to "ID" section. <Ref. to IDENTIFICATION , Identification .>
GENERAL SPECIFICATION
| Model | Sedan, Wagon | ||||
|---|---|---|---|---|---|
| 2.5 L Non-turbo | 2.5 L Turbo | ||||
| 5MT | AT | 6MT | 5MT | AT | |
| Rear differential type | T-type | VA1-type | T-type | VA2-type | |
| Identification | T1 | XJ | HY | EW | XZ |
| LSD type | - | Helical | Viscous coupling | ||
| Type of gear | Hypoid gear | ||||
| Gear ratio (Number of gear teeth) | 3.900(39/10) | 4.111 (37/9) | 3.545 (39/11) | 3.900 (39/10) | 3.083 (37/12) |
| Oil capacity | 0.8 l (0.8 US qt, 0.7 lmp qt) | 1.0 l (1.1 US qt, 0.9 lmp qt) | 0.8 l (0.8 US qt, 0.7 lmp qt) | ||
| Rear differential gear oil | GL-5 | ||||
GENERAL SPECIFICATION
| Model | OUTBACK | ||||
|---|---|---|---|---|---|
| 2.5 L Non-turbo | 2.5 L Turbo | 3.0 L | |||
| 5MT | AT | 5MT | AT | ||
| Rear differential type | T-type | VA2-type | |||
| Identification | JE | CD | CF | XU | |
| LSD type | Viscous coupling | ||||
| Type of gear | Hypoid gear | ||||
| Gear ratio (Number of gear teeth) | 4.111 (37/9) | 4.444 (40/9) | 3.272(36/11) | ||
| Oil capacity | 0.8 l (0.8 US qt, 0.7 lmp qt) | ||||
| Rear differential gear oil | GL-5 | ||||