Engine Control Module (ECM): Installation

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

CAUTION:

When the ECM on a model with immobilizer has been replaced, be sure to perform registration of the immobilizer. (Refer to the "IMMOBILIZER TEACHING OPERATION MANUAL".)
When the ECM has been replaced, be sure to perform the registration of VIN. Refer to OPERATION .

NOTE: When replacing the ECM, be careful not to use the wrong spec. ECM to avoid any damage on the fuel injection system.

Tightening torque:

7.5 N.m (0.76 kgf-m, 5.5 ft-lb)