LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Lighting System) >> Combination Base Switch Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Base Switch Assembly: Removal

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's airbag module. <Ref. to REMOVAL , Driver's Airbag Module . >
  2. Remove the steering wheel. <Ref. to REMOVAL , Steering Wheel . >
  3. Remove the screws, and remove the steering column lower cover.
    Fig 1: Locating Steering Column Covers Screw
    G05663714Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the combination switch. <Ref. to REMOVAL , Combination Switch (Light). > <Ref. to REMOVAL , Combination Switch (Wiper) . >
  5. Remove the four screws and remove the roll connector.
  6. Remove the three screws.
    Fig 2: Locating Combination Switch Screws
    G05004089Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector and remove the combination base switch assembly.
scientia non olet · About LEMON Manuals