LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Lighting System) >> Day Time Running Light System >> Inspection >> Daytime Running Light Module Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Daytime Running Light Module Check

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS PROCEDURE

Step Check Yes No
1 CHECK DTC. 
  1. Connect the Subaru Select Monitor.
  2. Read the DTC of the integrated unit.
 Is DTC displayed? Perform the diagnosis according to DTC. Go to step 2.
2 CHECK INPUT SIGNAL. 
  1. Display the current data of the integrated unit.
  2. Check the following input signals.
    1. Parking brake switch
    2. Shift position
    3. Light 2
 Is the input signal normal? Go to step 3. Check the defective part.
3 CHECK RELAY. 
Check the daytime running light relay.		 Is the relay OK? Go to step 4. Replace the relay.
4 CHECK HARNESS.  Is the harness OK? Replace the integrated unit. Repair the harness.
scientia non olet · About LEMON Manuals