Combination Switch (Wiper): Inspection: Notes
WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the continuity between each connector terminal.
SWITCH POSITION TERMINAL CHART
| Switch position | Terminal No. | Standard | |
|---|---|---|---|
| Front | OFF | 7 and 16 | Less than 1 Ω |
| INT | 7 and 16 | Less than 1 Ω | |
| LO | 7 and 17 | Less than 1 Ω | |
| HI | 8 and 17 | Less than 1 Ω | |
| Washer ON | 2 and 11 | Less than 1 Ω | |
| Rear | OFF | 2 and 10 10 and 12 2 and 12 |
1 MΩ or more |
| INT | 2 and 13 | Less than 1 Ω | |
| ON | 2 and 10 | Less than 1 Ω | |
| Washer ON | 2 and 12 | Less than 1 Ω |
If continuity is not as specified, replace the switch.