LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (LAN System (Diagnostics)) >> Subaru Select Monitor >> Operation >> Clear Memory Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clear Memory Mode

WARNING: This page is about a different car, the 2006 Subaru Outback, 2006 Subaru Legacy, and 2006 Saab 9-2X. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» screen, select {2. Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Integ. unit mode} and press the [YES] key.
  3. Press the [YES] key after the information of body integrated unit type is displayed.
  4. On the «Integ. Unit mode failure diag» display screen, select {Clear Memory} and press the [YES] key.
    DISPLAY CONTENT

    Display Contents to be monitored
    Clear Memory? Clear function of DTC and freeze frame data
  5. When "Done" is shown on the display screen, turn the ignition switch to OFF.
    NOTE: For details concerning the operation procedures, refer to the "Subaru Select Monitor Operation Manual".
scientia non olet · About LEMON Manuals