LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (LAN System (Diagnostics)) >> Subaru Select Monitor >> Operation >> Display Of Analog Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Display Of Analog Data

WARNING: This page is about a different car, the 2006 Subaru Outback, 2006 Subaru Legacy, and 2006 Saab 9-2X. However, it is still accessible from the selected car via links, so may be relevant.
DISPLAY OF ANALOG DATA

Items to be displayed Unit of measure Remarks Note
BATT Voltage (Control) 10 - 15 V Body integrated unit input value Always
BATT Voltage (BACK UP) 10 - 15 V Body integrated unit input value Always
IG Power Supply Voltage 10 - 15 V Body integrated unit input value Ignition switch ON
ACC voltage 10 - 15V Body integrated unit input value Ignition switch ACC
Illumination VR voltage 0 - 5 V Body integrated unit output value Small light switch ON
Illumi. output d-ratio 0 - 100% Body integrated unit input value Small light ON Illumination volume is other than bright.
Ambient temp sensor V 0 - 5 V Body integrated unit output value Ignition switch ON
Ambient temperature -40 - 87.5°C Body integrated unit output value Ignition switch ON
Fuel level voltage 0 - 8 V Body integrated unit input value Ignition switch ON
Fuel level resistance 0 - 102.3 Ω Body integrated unit input value Ignition switch ON
key-lock solenoid V 6 - 12 V Body integrated unit output value Other than parking range Ignition ON
number of regist. 0 - 4 Key No. to register  
Front Wheel Speed km/h CAN data input value Reception from VDC unit
VDC/ABS latest f-code DTC display (Temporarily) CAN data input value It is normal when DTC is not been input even if this code is displayed.
Reception from VDC
Blower fan steps 0 - 2 levels CAN data input value 0: OFF, 1: Low, 2: 2 levels or more Reception from air conditioner ECM
Fuel level resistance2 0 - 102.3 Ω CAN data output value Reception from body integrated unit
Fuel consumption cc/s CAN data input value Reception from ECM and transmission to center monitor
Engine coolant temperature -40 - 130°C CAN data input value Reception from ECM
Vehicle lateral G m/s2 CAN data input value Reception from VDC unit
SPORT Shift Stages 0 - 7 levels CAN data input value (0: Light OFF; 1 - 5: Gear display; 6: Fail; 7: ATF temperature High/Low) Reception from TCM
Shift Position 0 - 7 levels CAN data input value 0: 1; 1: 2; 2: 3; 3: 4; 4: D; 5: N; 6: R; 7: P shift position (There is no 8 input.) Reception from TCM
Off delay time OFF, Short, Normal, Long Body integrated unit setting items Customize setting
Auto lock time 20, 30, 40, 50, 60 seconds Body integrated unit setting items Customize setting