Function Check

WARNING: This page is about a different car, the 2006 Subaru Outback, 2006 Subaru Legacy, and 2006 Saab 9-2X. However, it is still accessible from the selected car via links, so may be relevant.

In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.

On the «Main Menu» display screen, select {Each System Check} and press the [YES] key.
On the «System Selection Menu» display screen, select the {Integ. unit mode} and press the [YES] key.
On the «Integ. Unit mode failure diag» display screen, select {Function Check} and press the [YES] key.
Select the item to be operated on the «Function Check» display screen with «UP/Down key» and press the [YES] key.

Fig 1: Display Function Check Screen
Pressing [YES] starts, [NO] cancels the operation and [YES] returns to the System Operation Check Mode display screen.
NOTE: If not equipped (based on area or condition), process will not go on.