Side Retainer

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Install the oil seal and O-ring of side retainer after the adjustment of backlash and tooth contact.

Install the bearing outer race to side retainer.
Install a new oil seal using ST.
ST 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER

NOTE: Apply oil to the oil seal lips.

Fig 1: Identifying Bearing Outer Race To Side Retainer
Install a new O-ring.

Fig 2: Identifying O-ring