Section 53 (Security And Locks): General Description: Caution

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Before disassembling or reassembling parts, always disconnect the battery ground cable from battery. When repairing the audio, control module, etc. which are provided with memory functions, record the memory contents before disconnecting the ground cable from battery. Otherwise, these contents are erased upon disconnection.
Reassemble the parts in the reverse order of disassembly unless otherwise indicated.
Adjust the parts to the specifications described in this manual if so designated.
Connect the connectors securely during reassembly.
After reassembly, make sure all the functional parts operate smoothly.
The airbag system wiring harness is routed near electrical parts and switches.
Airbag system wiring harnesses and connectors are yellow. Do not use the electrical test equipment on these circuits.
Be careful not to damage the airbag system wiring harness when servicing the ignition key cylinder.